Building Code and Building Construction - Questions and Answers
Or when you want to know how construction is supposed to be done.

|
AskCodeMan.com
|

Custom Search

Fire Sprinklers Quadraplex 1984

Fire Sprinklers Quadraplex 1984

New postby Bruce Ramsey on Thu Jul 18, 2013 5:05 pm

Landlord called me and said he has a new tenant who has called and complained about a laundry list of nusiance items. Most he was able to repair. Tenant is complaining the sprinkler heads on a 1984 quadraplex building are too far recessed. Landlord has already installed all new smoke alarms, CO alarm and provided 2 fire extingishers to the 2 bedroom, 2 bath unit.

Landlord is looking for more information regarding sprinkler requirements for his building. He wants to be able to respond to the tenant but does not want to go directly to a sprinkler installer for fear of being oversold repairs/upgrades that are unnecessary and/or costly. How or why the tenant would know the sprinkler heads are too far recessed is unknown and can't/won't be answered.

Can you provide a reference that would outline the basic rules for sprinklers for a 1984 quadraplex? I don't have any copies of the commerical codes, only residential. I am guessing there are probably some NFPA 72 or 13 stuff that may also apply. Landlord wants to show due diligence regarding tenants questions. Building is located in Atlanta Georgia.

Thank you.
Bruce Ramsey
US Inspect
Atlanta, Ga
Bruce Ramsey
 
Posts: 27
Joined: Tue Mar 31, 2009 3:52 pm
Location: Atlanta, Ga.

Re: Fire Sprinklers Quadraplex 1984

New postby Jerry Peck - Codeman on Thu Jul 18, 2013 6:58 pm

Bruce,

The only answer is that he needs to find out what brand and type of sprinkler head is installed and the escutcheons installed.

Being recessed indicates that the heads are recessed into a recessed escutcheon, and each type of escutcheon has a a minimum and maximum recessed amount. This is not a code item (other than 'install in accordance with the installation instructions and listing information'), just manufacturer's installation instructions/listing information item.

I cannot walk into a room and look at the fire sprinkler heads and escutcheons and say 'the heads are recessed too far/not far enough' because they may be exactly where they are required to be based on the manufacturer's information. However, it is likely than, over the years of painting and repainting, the paint build-up is not allowing the escutcheons to be pressed all the way up, which would make it look like (and may actually make it so) the head is recessed too far into the escutcheon.

To show due diligence he needs to go there and look closely at the escutcheons and heads to get the manufacturer, and to take some measurements, sometimes taking close up photos with a camera (a high resolution phone camera is usually pretty good these days) which will allow him (or you) to zoom in on the photo and look for the manufacturer's name and a model/style type/number on the sprinkler head, and do the same with an escutcheon after carefully removing it, he does not want to set a wet system off accidentally taking the escutcheon off.

If it is paint build-up, he can remove the escutcheons, scrape the paint off down to the ceiling level, then re-installed the escutcheon (after scraping the paint off the backside of its flange). If those are original escutcheons and heads, then the escutcheon should fit back as it was originally installed (presumable that would be 'correctly', but that is not a given).
Jerry Peck - CodeMan
AskCodeMan.com
Construction Litigation Consultant - Retired
Construction and Code Consultant - Semi Retired
User avatar
Jerry Peck - Codeman
Site Admin
 
Posts: 1199
Joined: Fri Dec 12, 2008 12:06 pm

Re: Fire Sprinklers Quadraplex 1984

New postby Bruce Ramsey on Tue Jul 23, 2013 8:18 am

Thank you.

Presumably fire sprinklers would have been required for a multi-family building in 84. Can you provide a reference that would indicate Yea or Nea to sprinklers required in a the building referenced above?
Bruce Ramsey
US Inspect
Atlanta, Ga
Bruce Ramsey
 
Posts: 27
Joined: Tue Mar 31, 2009 3:52 pm
Location: Atlanta, Ga.


Return to Plumbing: Water heaters, fixtures, traps, hose bibbs, water pressure, supply & DWV piping



Who is online

Users browsing this forum: No registered users and 9 guests